We have tried to answer as many relevant questions below so you can get a better idea of the brick and stone wall cladding products we offer and how you can use them. If you have any other questions, please feel free to contact us on 07762 603 548 and we’ll do our best to answer them for you.
Stone veneer cladding is a cast matrix of natural aggregates, pigments along with cement and other binders to reproduce an exact replica of a stone face.
This stone wall cladding ranges from 20-40mm thick depending on the style.
Any standard timber stud or block/brick wall is suitable. You simply apply the adhesive to the back of the stone cladding or the wall and stick. Very much like wall tiling.
Yes our stone cladding is approx half the weight of natural stone.
No if you are good at DIY or you know a good handyman, its very simple to fit the wall cladding.
We manufacture all to order so most from 3 days for small quantities to 2 weeks for large orders.
We send all orders out on pallets or crates with packing card and shrink wrapped. A lorry will arrive on an assigned day giving you a phone call prior to this (approx 2hrs before). The driver will pallet truck your delivery off his lorry to your premises, as far as the truck will allow him.
Before you sign the delivery note always inspect the order fully for any damages or losses. Check the pallet has not been opened or hit in transit. If any of these have occurred you must mark it on the delivery note when signing. Also take pictures before you remove from pallet etc. Your delivery is fully insured and any losses or damages will be fully replaced if marked on the delivery note.
Very simply, measure your wall in m2 and add 5% for waste. If you need corners also measure the total height of corners in linear meters.
We supply bagged products of adhesive and pointing. Contact us for a quote.
If you have any other questions that we haven’t answered above, please feel free to contact us.
